Whirlpool RF354BXB Use And Care Manual page 30

PROBLEM POSSIBLE CAUSE
SOLUTION
Control knob(s)
You are not pushing in
Push control knob(s) in before turning to
a
will not turn
before trying to turn.
setting.
Self-Cleaning
The Oven Selector and Set both the Oven Selector and Oven
cycle will not
Oven Temperature Control Temperature Control Knob to CLEAN.
Dperate Knob are not set to CLEAN.
The range clock does not Reset clock to show the correct time of
show the correct time of day. (See page 11.)
day.
The Lock Lever is not in the Move the Lock Lever all the way to the
CLEAN position-all the way right.
to the right.
The Start Time Dial does Reset the Start Time Knob to show the
not show the correct time of
correct time of day. Pull knob out all the
day or the knob is not all
way.
the way out.
The Stop Time Dial is not
See Step
3
in "Setting the controls" on
set ahead to the time you
page 22 for proper setting instructions.
want the Self-Cleaning
cycle to stop.
Zooking The range is not level.
Level range. (See Installation Instruc-
PeesuIts are not tions.)
what you
expected
The oven temperature
Adjust the oven temperature control. (See
seems too low or too high.
"Adjusting the oven temperature controf"
on page 13.)
The oven was not pre-
heated as the recipe calls
Preheat oven if called for in recipe.
for.
The recipe has never been
tested or is not from a
Use only tested recipes from a reliable
source.
reliable source.
The pan used is not the
type or size recommended
in the recipe.
Refer to a reliable cookbook for recom-
mended pan type and size.
There is not proper air
Allow 1% to
2
inches (4-5 cm) on all sides
circulation around pan
of the pans for air circulation. There must
when baking.
be a minimum space of 1 inch (2.5 cm).
The cooking utensils are
Use cooking utensils with smooth, flat
not the proper shape or do
not fit the surface units
bottoms that fit the surface units being
used.
being used.
30