Whirlpool RF354BXB Use And Care Manual page 23

4. Move the Lock Lever to the right-the
Clean position. The OVEN HEATING
Indicator Light will come on.
5. When the oven temperature goes
above
normal baking/roasting tempera-
tures, the door cannot be opened and the
Lock Lever must not be moved.
6. After the Self-Cleanlng cycle is com-
pleted and the oven has cooled suffi-
ciently,
the Lock Lever can be moved
back to the left.
DO NOT FORCE IT. Wait
until
it
moves easily.
Turn
the Oven
Selector and Oven Temperature Control
Knob to OFF.
7.
After the oven is cool, wipe off any
residue or ash with a damp cloth.
If
needed, touch up spots with a
soapy
steel-wool pad.
To stop the Self-Cleaning
cycle at any time:
1. Push in and turn
the Stop Time Knob
clockwise
until it points to the correct
time of day.
2. Turn
the Oven Selector and Oven
Temperature Control Knob to OFF. When
the oven has cooled sufficiently,
move
the Lock Lever back to the left.
DO NOT
FORCE IT. Wait
until it moves easily.
Special tips
l
Keep
the kitchen well ventilated during the
Self-Cleaning cycle to help get rid of heat,
odors and smoke.
l
After the oven is cool,
wipe up any residue
or ash with a damp cloth or sponge. If any
spots remain, clean with a mild abrasive
cleanser or cleaning sponge.
l
Clean
the oven before it gets heavily soiled.
Cleaning a very soiled oven takes longer and
results in more smoke than usual.
l
If the Self-Cleaning cycle
does not get the
oven as clean as you expected, the cycle
may not have been set long enough or you
may not have prepared the oven properly. Set
the Self-Cleaning cycle longer the next time
and hand-clean areas noted on page 21.
23