Table of Contents
Advertisement
Flat Flexible Cable
A 12-pin flat flexible cable can be used to connect the EM3070 to a host device. The cable design must
be consistent with the following specifications shown below. Use reinforcement material for the
connectors on the cable and reduce cable impedance for reliable connection and stable performance.
Cable Connection
Be sure the power is cut off before connecting a flexible cable to the host interface connector on the
EM3070. Hot plugging could damage the engine or the host device.
Connect the EM3070 to a host device with a 12-pin flexible cable as shown in the following figure.
12
Advertisement
Table of Contents
