Subscribe to Our Youtube Channel
Related Manuals for Leviton PowerSwitch EDSR
Summary of Contents for Leviton PowerSwitch EDSR
- Page 1 PowerSwitch Enclosed Disconnect Switch with Receptacle (EDSR) Cat. No. EDSR Rated: 30A-600VAC Max. INSTALLATION INSTRUCTIONS DI-000-0EDSR-00A...
- Page 2 • The EDSR has an environmental rating of IP66, UL Standard 50 and NEMA environmental ratings of 4X and 12K, when used with Leviton WETGUARD locking plugs. NOTE: If other mating plugs are used the environmental rating is IP54 and NEMA environmental rating 3R.
-
Page 3: Installation Instructions
• Meets the requirements of Outdoor/Indoor installations conforming to IP 54 and NEMA 3R with standard NEMA plugs and connectors. • Meets the requirements of Outdoor/Indoor installations, conforming to IP 66, UL Standard 50, and NEMA Environmental Ratings of 4X,12K, only when used in conjunction with Leviton WETGUARD plugs. - Page 4 TO INSTALL: NOTE: Leviton EDSR Switches may be mounted for Top or Bottom feed of supply wires (refer to Figures 2 and 3). MOUNTING: WARNING: TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT THE CIRCUIT BREAKER OR FUSE, AND TEST THAT THE POWER IS OFF BEFORE ATTEMPTING TO INSTALL ENCLOSURE.
- Page 5 Top or Bottom Feed: NOTE: A metal closure plug must be grounded (bonded) back on to an unused ground terminal. Use of a UL Listed Watertight conduit fitting (not included) required to maintain Type 4X and Type 12K ratings (refer to Figures 2, 3). 1.
- Page 6 If installing a 30A Receptacle no components are required to be replaced. • Leviton EDSR is pre-assembled with Gaskets for a 30A Receptacle. When using with a 20A Receptacle, the 20A Gasket and Gasket Clamp (included) must be used along with a...
- Page 7 To use, turn EDSR switch to the OFF position. Raise Receptacle Cover and insert mating plug. Refer to Ratings chart (page 7) for the list of mating configurations. The EDSR will work with all 20A and 30A NEMA Configurations. For an environmental rating of IP66 "while-in-use", a Leviton WETGUARD plug...
- Page 8 Wetguard 28W83 ** To maintain an environmental rating of IP54 and NEMA 3R, Leviton EDSR enclosures do not require proprietary plugs or receptacles. Any (non-shrouded) NEMA mating plug or receptacle can be used. For an environmental rating of IP66, UL Standard 50, and NEMA environmental ratings of 4X and 12K, a Leviton WETGUARD mating locking plug must be used.
- Page 9 Wiring Diagrams Wire Diagram 1 Wire Diagram 2 Wire Diagram 3 Wire Diagram 4 NEMA L5-20 NEMA L6-20 NEMA L7-20 NEMA L8-20 Wire Diagram 5 Wire Diagram 6 Wire Diagram 7 Wire Diagram 8 NEMA L9-20 NEMA L14-20 NEMA L15-20 NEMA L16-20 Wire Diagram 9 Wire Diagram 10...
- Page 10 Wiring Diagrams Wire Diagram 12 Wire Diagram 13 Wire Diagram 14 Wire Diagram 15 NEMA L5-30 NEMA L6-30 NEMA L7-30 NEMA L8-30 Wire Diagram 16 Wire Diagram 17 Wire Diagram 18 Wire Diagram 19 NEMA L9-30 NEMA L14-30 NEMA L15-30 NEMA L16-30 Wire Diagram 20 Wire Diagram 21...
- Page 11 NOTES...
-
Page 12: Product Information
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for two years from the purchase date. Leviton’s only obligation... - Page 13 THIS PAGE IS NOT TO BE PRINTED IN BOOKLET 11.0" 5.5" PowerSwitch Saddle 8.5" 8.5" Booklet Stitch Cat. No. FINAL SIzE OVERALL SIzE LEVITON INSTRUCTION SHEET/MANUAL SPECIFICATIONS DI-000-0EDSR-00A Black Helvetica 50 Lb. offset Paper size: 5.5" X 8.5" Booklet Overall size: Final fold size: DOCUMENTATION 3/12/08...
Need help?
Do you have a question about the PowerSwitch EDSR and is the answer not in the manual?
Questions and answers