The Storage Drawer - Whirlpool RF317PXX Use & Care Manual

The Storage Drawer
The storage drawer is for storing pots and pans. The drawer can be removed to
make it easier to clean under the range, and to check for installation of the
anti-tip bracket.
Use care when handling the drawer.
Removing the Storage Drawer
1.
Emptv drawer of any pots and
2. Lifl back slightly and slide drawer
pans'before removing drawer. Pull
drawer straight out to the first stop.
Lift front and pull out to the second
stop.
Replacing the Storage Drawer
1.
Fit ends of drawer sliz rails into
the drawer guides on both sides
ofopening.
all the way out.
2. Lift drawer front and push in until
metal stops on drawer slide
rails clear white stops on drawer
guides. Lift drawer front again
to clear second stop and slide
drawer closed.
To verity the anti-tip bracket
is engaged:
l
Remove the storage drawer.
l
Look to see if the anti-tip bracket is
attached to floor with screws.
l
Make sure one rear leveling leg is
positioned under the anti-tip
bracket.
l
See Installation Instructions for
further details.