Advertisement
QuickStart:
6. MANUAL ADJUST:
Method #1 Select Auto/Level mode:
From the default start-up screen push F2 until
"Range" shows above the F3 button, then press
the F3 [Range] button.
Press F1 [Manual] to display " [Level] [Back] [Span]."
Note: the Mode indicator now displays "Manual" at the upper left corner of the LCD screen.
Press F1 [Level] to display the Level adjustment screen [Up] [Back] [Down].
Press F3 [Span] to display the Span adjustment screen [Increase] [Back] [Decrease].
Method #2 Quick Toggle Auto/Level mode:
When NOT in a menu mode (no menu bar showing), press the [F1] button for 1 or 2 seconds to toggle
between Auto and manual.
While in manual mode, and NOT in a menu mode (no menu bar showing), press the [F3] for a one time
auto rescale of level and span while remaining in the "Manual" mode. The camera will power up in the
same mode (auto or manual) that it was in when powered down.
NOTE: if in Menu mode (menu bar showing) pull the trigger two times to exit menu mode.
7. PAUSE IMAGE:
you desire to save, abort the saved image by pressing the trigger button again and return to a live image.)
8. SAVE IMAGE:
menu. To save the displayed image press the F1 [Store] button.
9. PALETTE:
From the default start-up screen press F2 until [Palette] appears in the lower portion of the LCD
screen.
Press F1 [Palette] then F1 or F2 then F1 [Up] or F3 [Down] to scroll through the eight available palette
choices.
10. EMISSIVITY:
From the default start-up screen press F2 until [Emissivity] appears in the lower portion of the
LCD screen. Press the F1 button and follow prompts to adjust.
11. REFLECTIVE BACKGROUND TEMPERATURE:
[Background] appears in the lower portion of the LCD screen. Press the F3 button and follow prompts to adjust.
Ti27, TiR27
IFOV =1.67 mRad
(Theoretical with 240x180 Detector and standard lens)
Ti29, TiR29
IFOV =1.43 mRad
(Theoretical with 280x210 Detector and standard lens)
Ti32, TiR32
IFOV =1.25 mRad
(Theoretical with 320x240 Detector and standard lens)
© 2011 The Snell Group / 322 N. Main St. / Suite 8 / Barre, VT 05641 / 800.636.9820
FLUKE Ti27, TiR27, Ti29, TiR29 Ti32, TiR32
(Level and Span)
Pause or Freeze the image by momentarily pressing the front Trigger. (If this is not an image
To save an image first pause the image as above which will also displays the Image Captured
From the default start-up screen press F2 until
2
Page
Detect 1in. target @ 49ft.
Detect 1in. target @ 58ft.
Detect 1in. target @ 66ft.
/
www.thesnellgroup.com
Advertisement
