Troubleshooting Guide; Error Codes Shown On The Led Display And; Battery Condition—Ba-Hi/Lo (Battery High/Low ) - Minibar Systems SmartBox Operating Manual

Digital code safe
Table of Contents

Advertisement

6. Troubleshooting Guide

1)
2)
SMARTBOX OPERATING MANUAL—JUNE 2009

ERROR CODES SHOWN ON THE LED DISPLAY AND

a)
ERROR – The code you have entered is not correct. Check the code and re-enter.
b)
ERROR 1 – The locking bolts are blocked and cannot retract. Push the door inward to
release the blocked bolts. Try to open the safe by re-entering the code.
c)
ERROR 2 – The door is not shut properly and the bolts have been retracted
automatically. Remove the barrier and try it again.
Battery Condition—BA-HI/LO (Battery high/low )
The batteries will last for 12 months for normal use. The display will show "BA-LO" if the
batteries need to be replaced. Use 4 AA / LR6 alkaline batteries only.
Note: Please refer to local ordinances and environmental standards for proper battery disposal.
17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SmartBox and is the answer not in the manual?

Table of Contents

Save PDF