Chuango H4 PLUS User Manual page 9

Description of Indicator Light
Indicator Light
WiFi Indicator
Light
Status Indicator
Light
Cellular Indicator
Light
Note:
The hub must be always be connected to AC power in order to maintain a WiFi
connection. When AC power is lost, the speaker will beep for 30 seconds and the Hub will
stay online for 2 minutes; long enough to send out push notifications to users alerting them
of the power disconnection. The system will remain active and continue to monitor during a
power outage. If the system is armed, it will activate its onsite alarm if a sensor is triggered.
How to identify if the system is working through WiFi or Cellular?
Working through WiFi: The WiFi indicator and the Cellular indicators are on.
Working through Cellular: The WiFi indicator and the Cellular indicator blink quickly.
Status
Blinking
Yellow
White
Blinking White
Blue
Green
Red
Blinking Red
Alternating Red and Blue
Off
Blinking (3 times per
second)
Blinking (once per second)
Solid Blue
Off
Meaning
Searching for WiFi network
Booting up after power on or WiFi network is
connected
Powered on
Hub is in low battery condition. Please
connect with AC power.
Home mode
Disarm mode
Arm mode
Alarm/panic mode
Hub is in connecting status
Hub is not powered on, or not powered with
the adapter
Cellular network is connected and the system
is using the Cellular network
Searching for the Cellular network
Booting up after power on or Cellular
network is connected, but the system is using
the WiFi network
No SIM card or Cellular has been deactivated
on the App
06