How The Alarm System Works - Chuango H4 PLUS User Manual

How the Alarm System Works

Arm the system
using the remote
control or the App.
The Hub is set to Arm
Mode (The red Status
Indicator is on) .
The Hub receives the
command and enters
"Armed" mode.
When a Door/Window
Sensor detects a door/
window opening, the sensor
sends a signal to the Hub
letting the Hub know there
has been an intrusion.
The Hub sounds at 90dB
on-site.
The Hub sends a push notification
and text message to your phone.
You will also receive an email
when a sensor is triggered if you
enable the notification function
located in your app settings. After
that the hub will also make phone
calls to each pre-set phone
numbers.
03