Table of Contents
Advertisement
NOTE: Only ±9.9C, ±9.9F, ±9.9% are available to be adjusted. Long press HOLD or BKLT button may quick
to increase or decrease values.
DATALOGGER PC SOFTWARE SCREEN
Logger status
Temp, RH%
Stored date/time
Parameter
Value and line color
Warning message
LOGGER INTRODUCTION:
DATALOGGER FEATURES:
ü
The meter features stand alone (off-line) datalogger function, may store up to 32,004 points data in
meter, then download to PC for further analysis.
ü
There are 5 starts to record modes: (Unique) a.Immediately (Once OK button is pressed, meter starts to
record). b.Real-time (Meter may connect with PC for on line datalogging to see current air quality real
time). c. Key start (Long press BKLT button to start recording). d.Rollover (Data stored the latest 32,004
points data ). e.Schedule (Set time and date to start).
While doing datalogging function, if meter is off (Out of power or fan is stopped), the stored data is still
ü
exist.
ü
While doing datalogging, the "Recording bar" on meter LCD is flashing, see below: (If stored data is not
cleared from meter, the recording bar shows at the left corner in screen.)
Current date/time
Logger status
O
(%)
2
Download button
Exit
5
Advertisement
Table of Contents
