Napoleon GS67-1 Installation Instructions

GS67-1 BLOWER KIT INSTALLATION INSTRUCTIONS
ENSURE THE UNIT IS COMPLETELY COOL BEFORE STARTING INSTALLATION.
TO AVOID DANGER OF SUFFOCATION KEEP THE PACKAGING BAG AWAY FROM BABIES AND CHILDREN.
DO NOT USE IN CRIBS, BED, CARRIAGES OR PLAY PENS. THIS BAG IS NOT A TOY. KNOT BEFORE
1. Remove the blower knock-out from the rear panel. (FIGURE 1)
2. Connect the flag connectors and ground wire to blower assembly.
3. Install the blower assembly by using 4 screws (supplied) to secure. (FIGURE 2)
4. Ensure wires do not interfere with the blower fins or touch the firebox bottom or sides.
BLOWER
KNOCKOUT
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada
!
THROWING AWAY.
FIGURE 1
WIRING DIAGRAM
(GROUND)
BLOWER
WARNING
BLACK
WIRE
HARNESS
GREEN
• (705)721-1212 • fax (705)720-9081
BLOWER
ASSEMBLY
FIGURE 3
TO
IPI
CONTROL
• www.napoleonfireplaces.com
FIGURE 2
GROUND
SCREW
W415-2205 / 12.02.16