26
8500 Series Series Reference Manual
2.1 Installing the Battery Pack
Always prepare a spare battery pack, especially when you are on the road. To save power,
turn off the backlight when you are working in a bright work area.
1. Place the mobile computer face down on a flat and clean surface.
2. Slide the battery pack into the battery compartment at a proper angle (30°~45°) so that
the tabs on the bottom of the battery are hooked in the grooves of the compartment.
Make sure that the battery is snugly fit into the compartment.
3. Hold the mobile computer still and slide the battery latch to lock the battery in the
compartment.
Note: For a new battery, make sure it is fully charged before use.
Figure 7: Installing battery pack