BT On-Air 2000 Executive User Manual page 10

On-Air 2000 Executive ~ 3rd Edition ~ 2nd August '02 ~ 4744
On the handset:-
L
Use the UP button to scroll to Base.
Press the OK button to confirm.
C OK
The display will show Register.
Press the OK button to confirm.
C OK
L
Use the UP or DOWN button to scroll to
M
Custom.
Press the OK button to confirm.
C OK
L
Use the UP or DOWN button to scroll to
M
the required base number.
C OK
Press the OK button to confirm.
At this stage if you require you can edit the
base name.
Press the OK button to confirm.
C OK
Enter the System Code using the keypad.
Press the OK button to confirm.
C OK
The display will now flash Searching for base.
You will then see a list of the available
handset numbers.
L
Use the UP or DOWN button to scroll to
M
the number you require.
Press the OK button to confirm.
C OK
After a few seconds the handset will be
registered and display:
Base 1
Handset 2
C can also be pressed to return
C OK
to idle.
9
Note
The number you save becomes the handset's name
(ie. 'Handset 2').
To de-register your BT On-Air 2000
Executive handset from the base
L
Press the UP button to scroll to the
Base menu.
C OK Press the OK button to confirm.
L
Use the UP or DOWN button to scroll to
M
Base settings.
Press the OK button to confirm.
C OK
M
Use the DOWN button to scroll to Handsets.
Press the OK button to confirm.
C OK
M
Use the DOWN button to scroll to
De-register.
Press the OK button to confirm.
C OK
Enter the System Code.
Press the OK button to confirm.
C OK
L
Use the UP or DOWN button to scroll to the
M
handset that you want to de-register.
Press the OK button to confirm.
C OK
This will time out and go back to idle.
Or
Press the C button until you get back to idle.
C OK
The handset is now de-registered.
Note
When planning to use a handset with more than
one base, we recommend that you:
• Give a number to each base (from 1-4).
• Number each handset (from 1-6).
• Register your handset(s) at base 2 (and 3 & 4
if used) using the same internal number as at
base 1.