Removing The Oven Door - Whirlpool GR395LXG Use & Care Manual

CARING FOR YOUR RANGE
R
EMOVING THE OVEN DOOR
For normal use of your range, you do not need to
remove the door. However, if you find it necessary
to remove the door, follow the instructions in this
section.
NOTE: The oven door is heavy.
Before removing the door:
1.
Use a putty knife or screwdriver and insert it at
the bottom corner of the door stop clip.
2.
Pry door stop clip free and remove from front
frame hinge slot. Take care not to scratch
porcelain.
3.
Repeat procedure for other door stop clip.
To remove:
1.
Open the oven door. Insert door removal pins,
2.
Carefully close the door until it rests against the
door removal pins.
To replace:
NOTE: The door removal pins you inserted must
still be in both hinges.
1.
Grasp the door on the sides with your fingers
on the front of the door and your thumbs on the
inside surface.
40 40
included with your
range, into both hinge
hangers. Do not remove
the pins while the door
is removed from the
range.
Door stop clip
Door removal
pin hole
Hinge
Front frame
hanger
hinge slot
3.
Grasp the door on the sides with your fingers on
4.
Pull door straight up, then toward you. Hinge
hangers will slide out of front frame hinge slot.
Range
the front of the door and
your thumbs on the
inside surface.