To Display Temperatures In °C Instead Of °F; How To Determine The Amount Of Adjustment Needed - Whirlpool GR395LXG Use & Care Manual

A
DJUSTING THE OVEN TEMPERATURE CONTROL
2.
Set the new offset temperature.
Press s to raise the temperature or t to lower
the temperature in 10°F amounts. You can set
the temperature change to as low as -30°F or as
high as +30°F. A minus (-) sign will appear before
the number when decreasing the temperature
setting. The minus sign shows the oven will be
cooler by the displayed amount. There is no sign
in front of the number when increasing the
temperature setting.
3.
Enter the adjustment.
NOTE: You must press START/ENTER or your
changes will not be made.
To display temperatures in °C instead of °F:
Press and hold for 5 seconds. You will hear a short
tone and the temperatures displayed will
switch to °C. To switch back to °F, repeat
CUSTOM
the instructions above. Whenever you
BROIL
switch, "°C" or "°F" will be displayed for 5
seconds.
How to determine the amount of
adjustment needed
The chart at the right tells you how much to adjust
the offset temperature to get the cooking results
you want. You can figure out cooking results by the
amount of browning, moistness, and rising times for
baked foods.
.
( CONT
)
PRESS YOU SEE
TEMP
(example when making oven
10°F warmer)
PRESS YOU SEE
START
ENTER
5 SEC
(time of day)
TO COOK
FOOD ...
A little more
Moderately more
Much more
A little less
Moderately less
Much less
USING YOUR RANGE
F
ADJUST BY
THIS NUMBER
OF DEGREES
(FAHRENHEIT)
+10
+20
+30
-10
-20
-30
21 21