At+Cpbfex Find Name Or Number In Module Phonebook - SimTech SIM800 Series Application Notes

G=?
OK
Parameters
See Write Command
Read Command Response
AT+BTPAIRCF If mode=1, the notification information is:
G? +BTPAIRCFG: <mode>,<pin_code>
OK
If mode=0 or 2, the notification information is:
+BTPAIRCFG: <mode>
OK
Parameters
See Write Command
Write Command Response
1) if PIN-Code
OK
inputted by
Parameters
manual while
pairing
AT+BTPAIRCF
G=1[,<pin_code>
]
2） if using random
PIN-Code while
pairing
AT+BTPAIRCF
G=<mode>
Note When mode is 0 or 2, it is random PIN-Code
When mode is 2, it has no +BTPAIRING information, and response the
pairing request automatic;
When mode is 0, it has +BTPAIRING informtioan, and need input
AT+BTPAIR=1,1 to confirm pairing request.
The setting will be valid after reboot.

2.31. AT+CPBFEX Find name or number in module phonebook

Find name or number in module phonebook
AT+CPBFEX
Test Command Response
AT+CPBFEX=? +BTVIS: (0,1),40
OK
Write Command Response
SIM800 Series_Bluetooth_Application_V1.02
<mode> 0 random PIN-Code, and need confirm the pairing request
1 PIN-Code inputted by manual
2 random PIN-Code, and response the pairing request
automatic
<pin_code> PIN-Code, the length is four. default value is 0000
Smart Machine Smart Decision
29 2014-06-30