At+Btoppacpt Accept Opp Service - SimTech SIM800 Series Application Notes

<id>
<name>
<address>
<profile name> profile name
URC
If incoming connecting request:
+BTCONNECTING: <address>, <profile name>
Parameters
<address>
<profile name> profile name
Note Max length of <name> is 18 bytes, 18 bytes in UTF-8 code

2.11. AT+BTOPPACPT Accept OPP service

AT+BTOPPACPT Accept OPP service
Test Command Response
AT+BTOPPACP +BTOPPACPT: (list of supported <confirm>s),(list of supported<drv>)
T=?
OK
Write Command Response
AT+BTOPPACP OK
T=<confirm>[,<d
rv>] +BTOPPPUSH: <status>
Parameters
URC:
If there has an incoming opp file, there will be a URC report.
+BTOPPPUSHING: <name>, <file name>
Parameters
<name>
<file name>
Note 1. Max length of <name> is 18 bytes, 18 bytes in UTF-8 code
SIM800 Series_Bluetooth_Application_V1.02
<confirm> 1 accept
0 reject
>0 connected device ID
device name
device address
device address
<confirm> 1 Accept
0 Reject
<drv> 0 internal flash memory
1 external memory card
<status> 0 failed
1 successful
device name
file name
Smart Machine Smart Decision
15 2014-06-30