At+Btgetprof Get Profile Provided By Paired Device; At+Btacpt Accept Connecting Request - SimTech SIM800 Series Application Notes

+BTDISCONN: <name>,<address>,<profile name>
Parameters
<device ID>
<name>
<address>
<profile name> profile service
Note
1． Max length of <name> is 18 bytes, 18 bytes in UTF-8 code
2． If disconnected by remote, there still be URC: +BTDISCONN

2.9. AT+BTGETPROF Get profile provided by paired device

AT+BTGETPROF Get profile provided by paired device
Test Command Response
AT+BTGETPRO +BTGETPROF: (list of supported <device ID>s)
F=?
OK
Parameters
See Write Command
Write Command Response
AT+BTGETPRO OK
F=<device ID>
+BTGETPROF: <profile ID>,<profile name>
Parameters

2.10. AT+BTACPT Accept connecting request

AT+BTACPT Accept connecting request
Test Command Response
AT+BTACPT=? +BTACPT: (list of supported <confirm>s)
OK
Write Command Response
AT+BTACPT=< OK
confirm>
If connected successfully, then will report:
+BTCONNECT: <id>,<name>,<address>,<profile name>
If connecting failed:
+ BTDISCONN: <name>,<address>,<profile name>
Parameters
SIM800 Series_Bluetooth_Application_V1.02
connected device ID
device name
devie address
<device ID> Paired Device ID
<profile ID> profile ID
<profile name> profile name
Smart Machine Smart Decision
14 2014-06-30