At+Btata Answer Incoming Call; At+Btatdl Redial Last Number - SimTech SIM800 Series Application Notes

AT+BTSPPCFG= If successful,
"MC",2 response
SEND OK
1(Enable If failed,
multi-connect)
SEND FAIL
AT+BTSPPSEN Or if this connectId is not allowed to send data,
D=<connectId>,< ERROR
length>
Parameters
2).If
AT+BTSPPCFG=
this param is no need.
"MC",2 response
0(Disable
When the length of inputing data is up to <length> specified, the package
multi-connect)
will be sent out automatically. Press ESC key will quit the process.
AT+BTSPPSEN
D=<length>
Execute Response
Command >
AT+BTSPPSEN If successful,
D SEND OK
Or failed,
SEND FAIL
Or if this connectId is not allowed to send data,
ERROR
2.15. AT+BTATA

AT+BTATA Answer incoming call

Execute Command
AT+BTATA
Note

2.16. AT+BTATDL Redial last number

AT+BTATDL Redial last number
Execute Command
AT+BTATDL
Note
SIM800 Series_Bluetooth_Application_V1.02
<connectId>
<length> 1-1024, the length of data will be sent.
1.If multi-connection function is enabled, this command will be disabled.
2.In this mode, <Ctrl+z> will send the package immediately, and ESC
will quit the process.
Answer incoming call
Response
OK
URC
If there is incoming Call on remote phone, will report below:
BTRING
When module connected with smartphone as an earphone,if here comes
incoming call,the call would be answered through this command
Response
OK
When module connected with smartphone as an earphone,would redial
last number through this command
Smart Machine Smart Decision
connection`s ID.If disable multi-connection,
18 2014-06-30