Starting Up the Push Button Panel
2.3.2
Configuring Keys/LEDs When Using PROFIBUS-DP Connection
2-12
After having loaded the GSD files in the system, as described in Chapter 2.2,
the configuration software COM-PROFIBUS (SIMATIC S5) or HW-CONFIG
(SIMATIC S7) can be used to define all the settings for the Push Button Panel.
COM-PROFIBUS
Call in dialog box Slave properties by double clicking
on the PP symbol. When it appears, click on button
Configure.
HW-CONFIG
Select property page Configure in dialog box Object
properties.
OEM Push Button Panel Equipment Manual
Release 08/98