Page 1
XTRMB01 Xtreme PRO Gamer Standing workstation Please assemble your product on soft surface to avoid scratches and damages on lacquer.
Page 2
The Desk You Deserve Thank you for making StudioDesk your desk of choice! Before beginning assembly of your stand, let s get familiar with the parts you have received in your package. Please match the corresponding numbers on this page with the drawings. Parts 1. Motorized Electric legs 2. Bottom desk surface 3. Middle desk surface 4. Top desk surface 5. Top shelf 6. Padded armrest Hardware...
Page 3
Step One Assemble the motorized legs as per included manual. Place bottom desk surface to the floor and fix it using M6 screws as Shown on the illustration right. Step Two Fix the controller (14) to the desk using screws for wood (8) Step Three Apply only if you purchased keyboard tray Fix the keyboard tray side boards to the bottom desk surface using M6 screws as shown on the illustration on the right. Step Four Turn desk to the standing position to Continue with assembly.
Page 4
Step Five Insert wooden dowels (10) on the positions as illustrated on the illustration right. Step Six Optional step if you Purchase LED lighting. Led stripe is self adhesive. Remove dust from the edge of the middle desk surface. Remove small portion of the protection paper and start sticking LED stripe on the edge of the middle surface as shown on the illustration left. Refer to our video manual for more information. Step Seven Optional step if you Purchase LED lighting. Install middle desk surface on the corresponding wooden dowels.
Page 5
Step Eight If you purchase LED lighting go to step Nine and get back to this step after installing LED Stripe Install armrest to the main desk surface using screws for wood. Once armrest is in the place, install main desk surface on the top of the middle desk surface as shown on the illustration on the right. Step Nine Optional step if you purchases LED lighting Carefully remove the glass from the main desk surface and install shorter LED strip as shown in the illustration. Connecting cable should go out trough the hole towards down. Carefully put the glass back in the place. Step Ten Optional step if you purchase Rack rails Install rack rails using to the top shelf using M6 screws as shown on the illustration on the right. Rack rail has threaded and non threaded holes. Threaded holes should be turned towards front and rack rails fixed trough non threaded holes to the top shelf.
Page 6
Step Eleven Place the pillars on the positions so the long screws (13) can pass trough all three desk surfaces, pillars (7) and end in the top shelf (5). Fasten long screws using wrench tool. Note! Washers should be used from the bottom. Step Eleven As the last step, install USB hub cable inlay to your desk and connect it to your computer.
XTCL200 Electric In Height Adjustable Desk Frame ASSEMBLY MANUAL Electric In Height Adjustable Desk Frame 2 lifting column 2 stages Item No. XTCL200 Executive standard GBT 33242008 <<Furniture general technical conditions>> GBT 33252008 <<Metal furniture general technical conditions>> EN 125212009 <<Furniture Strength, durability and safetyRequirements for domestic tables>> Follow me 1.First check contents to make sure nothing is missing.
A . Exploed view B. Part List 1. Adjustable foot 8.Power line 2. Bottom 9. Extendable rod 3. Height adjustable 10. Upper beam 4. Top support 11. M6×12 screw 32pc 5. Control Switch 12. ST4×16 screw 15pc 6. 6Core patch cord 13.
Page 9
C. Assembly 1. Install the frame work on lifting columns with Allen key ( Pic 1 and Pic 2 ) 2. Install the top support with Allen key ( Pic 3 and Pic 4 ) 3. Install the bottom with Allen key ( Pic 5 and Pic 6 )
Page 10
4. Install the extendable rod to the hole of frame and fix it with Allen key (Pic 7 and Pic 8 )
Need help?
Do you have a question about the Xtreme PRO and is the answer not in the manual?
Questions and answers