Gronomics RGB 48-48 Assembly Instruction

1
Parts Identifi cation
Stack matching pieces in piles. Using the
parts list, locate and count the individual
pieces and verify that you have received
the correct number of pieces.
If any pieces are missing or
replacement parts are required, contact
Gronomics at 1-855-299-6727.
NOTE: Ground preparation is optional,
however we recommend leveling area
under frame of product, or place product
directly on a flat level surface before
filling with soil.
ITEM QTY.
1 4
2 7
3 1
Product Care & Maintenance -
outdoors, a natural oil finish applied regularly will help maintain the beauty and minimize cracking and drying. It is recommended to use Gronomics Garden Bed
Oil (Item # GBO-1Q), a non-toxic, food safe finish that is very easy to apply. Apply Oil when air and wind temperatures are between 50-90degrees. Avoid applying
in direct sunlight.
2

Side Rail Assembly

NOTE: Garden bed will be assembled upside down
and fl ipped over when completed.
Stand two 4" x 4" x 13" corner posts (Item 1) with
slots facing each post and slots facing away from
you.
Install the 45" x 5-1/2" side rail w/Logo (Item 3)
(position Logo upside down) into the slots and slide
to the bottom of the slots.
Repeat procedure for the two remaining corner
posts and a 45" x 5-1/2" side rail.
Packaged & Inspected by:
www.gronomics.com

Parts List

PART # DESCRIPTION
1301R Corner Post, W/ 2 DOVETAILED SIDES 4" x 4" x 13" - 10-1/4 Long Dovetail
Side Rail, 45" x 5-1/2" x 7/8"
4500T
Side Rail, (w/Logo), 45" x 5-1/2" x 7/8"
4500TL
Western Red Cedar will turn a weathered grey if left unfinished. Although no finish is required for cedar products when used
Raised Garden Bed
Assembly Instruction
1
Slots
1
East Bethel, MN USA
(2 Tier 48" x 48")
2
3
3
Position Logo Upside Down
Date:
Item #: RGB 48-48
Item #: RGB 48-48S
Slots
1
Continued
763-753-7374