Kobalt 2600503 Manual page 17

CARE AND MAINTENANCE
3. REPLACING THE IMPELLER
3a
• Remove the 5 screws
that secure the right
side cover.
3d
• Remove the belt.
3g
• Pull the axle and remove the
old impeller. Install the new
impeller and insert the axle.
3i
• Reinstall the left side plate, large pulley, belt and left side cover.
3b
• Remove the nut from
the right of the axle.
3e
• Using a socket (not included),
remove the the large pulley
inside the left side cover.
3h
• Reinstall the nut and right side cover.
17
3c
• Remove the 5 screws
that secure the left
side cover.
3f
• Remove the 6 screws
that secure the left side
plate.