Other Messages - Watt Drive L2000 Series Manual

Messages

Other messages

Cause Display
The inverter is currently in standby mode
or
There is an active reset signal.
The mains power supply has been switched
off.
The waiting time prior to automatic inverter
restart is coming to an end (refer to functions
b 01 and b 03).
The factory standard settings have been
selected and the inverter currently is in its
initializing phase (refer to functions b 84
and b 85). The parameters for the
European market (EU) are loaded. For
non-European inverter models there are
versions for North America (USA) and
Japan (JP).
The trip history register is being initialized.
The copy unit is carrying out a copy
operation.
No data available
(this may be displayed under functions d 08
and d 09 when the trip history register is
empty, or under d 04 when PID control is not
active).
Page 50 / 52