After Usage; Read Off Therapy Duration - Weinmann CPAP 20e Description Of The Equipment And Instructions For Use

4.4 After usage

1. Remove the headgear with the mask.
2. Push the on/off switch to switch the device off.
5. Clean the humidifier (see "5. Hygienic preparation" on page 25).

4.5 Read off therapy duration

CPAP 20e saves the data from 366 days and the associated therapy duration. You
can display the following values:
• Total therapy duration in hours
• Average therapy duration per day
• Therapy duration of current day including date
Note:
therapy day
A
midnight and 12 noon is allocated to the previous
The daily therapy duration of the last session is
shown on the display. Then "0" appears.
3. Remove the tube connection and the exhalation
system from the mask.
4. Clean the mask and the exhalation system(see
"5. Hygienic preparation" on page 25).
Note:
CPAP 20e and the power supply consume ap-
prox. 4 watt in standby mode .The unit does not
have a mains switch. To save electricity you can
remove the power plug from the outlet socket
during the day. It is therefore advisable to con-
nect the unit to a readily accessible socket. The
stored values and settings will not be lost.
always starts and ends at 12 noon. Data recorded between
day
.
EN
Operation
23