Gprs Attach; Access Point - LG KE590 User Manual

Settings

GPRS attach

You can set GPRS service depending
on various situations.
v
Power on
If you select this menu, the phone
is automatically registered to a
GPRS network when you switch
the phone on. Starting a WAP or
PC dial-up application creates
the connection between phone
and network and data transfer
is possible. When you end the
application, GPRS connection is
ended but the registration to the
GPRS network remains.
v
When needed
If you select this menu, the GPRS
connection is established when
you connect a WAP or application
service and closed when you end
the WAP or application connection.

Access Point

v
View: You can see the selected
profile.
v
Edit: You can edit the selected
profile.
58
(Menu 9.4.2.2)
(Menu 9.4.2.3)
v
New access point
• Name: You can type the network
name.
• Bearer: You can set the bearer
data service. Data/GPRS
<Data settings>
Appears only if you select Data
Settings as a Bearer/service.
- Dial-up number: Enter the
telephone number to dial to access
your WAP gateway.
- User ID: The users identity for your
dial-up server (and NOT the WAP
gateway).
- Password: The password required
by your dial-up server (and NOT the
WAP gateway) to identify you.
- Call type: Select the type of data
call; Analogue or Digital (ISDN).
- Call speed: The speed of your
data connection; 9600 or 14400
(Depends on Operator)
- Linger time: You need to enter
timeout period. After entering that,
the WAP navigation service will be
unavailable if any data is not input
or transferred.