Table of Contents
Advertisement
The phone lets you select another network if the phone
fails to access the selected network. If you switch off
the phone, the phone will be reset to Automatic.
]
Preferred: You can set a list of preferred networks
the handset should attempt to register with first,
before attempting to register to any other networks.
This list is created from the handset's predefined list
of known networks.
Change Frequency Band
When the America(900/1800) option is selected the
device can be used in the US, and when the
Europe(1900) option is chosen the device can be used
in European countries.
n
Note
The US frequency is set at 850/1900 MHz and the European
frequency is set at 1800 MHz.
n
Note
Note of caution that depending on the SIM card, the order of
the menu can differ. The World Phone menu option sets the
GSM frequency band between the GSM 900/1800 used in the
US or GSM 1900 used in Europe. This phone does not
automatically search and set the GSM frequency.
Instead the user must manually set the frequency band
(Menu 9.6.3)
based on his/her location. The default setting is "Europe
(900/1800)" so in order to switch to the European frequency,
simply select the "America (1900)"option from the World
Phone Setting menu. After the selection, turn the phone off
and on again to begin using the new frequency setting.
When traveling to different parts of the world, you must
always set the World Phone Setting to the correct frequency
band.
GPRS Attach
(Menu 9.6.4)
If you select Power On and you are in a network that
supports packet data, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data connection,
for example, to send and receive e-mail, is quicker. If
you select When Needed, the phone will use a packet
data connection only if you start an application or
action that needs it. The GPRS connection is closed
after it is not used by any application.
n
Note
If there is no GPRS coverage and you have chosen Power
On, the phone will periodically try to establish a packet data
connection.
Network Profile
(Menu 9.6.5)
Settings
67
Advertisement
Table of Contents
