Table of Contents
Advertisement
NOTE: You will notice that the blades should be 2" /5 cm apart and on
either side of a small lug at the point that they enter the power handle.
Take extra care to make sure the blades are still connected at the tip.
Blade insertion slots
CARE, CLEANING AND STORAGE
1. Ensure the power outlet is switched off, then
unplug the product before removing the blades
and / or cleaning.
2. Remove the blades.
3. Separate the blades by sliding the rivet from
one blade out of the keyhole slot of the other
blade.
4. Carefully wash the blades in warm soapy water.
5. Dry thoroughly and carefully slide the plastic
safety sheath over the blades.
6. Wipe the power handle with a damp cloth.
Never immerse the power handle in water or
any other liquid.
7. Storing the power cord when not in use:
Once the wood stand is assembled, slide the
wires into the space behind the wood stand
(within the black plastic area) for safety.
Lug
7
www.PyleUSA.com
Advertisement
Table of Contents
