Table of Contents
Advertisement
BEFORE USE
Before first use, and after each subsequent use, wash the knife blades in
warm soapy water and dry thoroughly. Blades are sharp-handle carefully.
Wipe the handle with a damp cloth to clean.
ASSEMBLY OF THE WOODSTAND FOR COUNTERTOP USE
The wood stand can be stored flat inside a drawer
or assembled for countertop storage. To assemble
for countertop use, slide the black tab inside the
slot found underneath the wood stand and place
onto flat surface.
REMOVING BLADE FROM WOODSTAND
Select the blade you want to use for either slicing
meat or cutting bread. While holding the wood
stand for stabiilty, pull at the black tab between
the knife blades towards you and twist the tab in
either direction left or right) into vertical position
then release. Remove the desired blade.
Then pull the black tab again and rotate back
into horizontal position over the remaining blade
making sure the blade fits into the tab's slot to
securely hold it into place.
INSTRUCTIONS IMPORTANT NOTES
Maximum continuous use is 5 minutes. Only handle blades by the plastic
guards or by the blunt edge of the knife. The blades are extremely sharp.
Keep fingers away from the cutting edges. Keep the plastic sheaths on the
blades when not in use. Please save instructions.
4
www.PyleUSA.com
Advertisement
Table of Contents
