Whirlpool RE960PXY Use And Care Manual page 21

Move the Lock Lever to the right-the Clean
position.
After the Self-Cleaning cycle is started, the
Lock Indicator Light comes on when the oven
temperature exceeds normal baking/roasting
temperatures.
The door cannot be opened
and the Lock Lever must not be moved when
the Lock Indicator Light is on.
After the Self-Cleaning cycle is completed
and the oven reaches normal baking/
roasting temperatures, the Lock Indicator
Light will go off. Move the Lock Lever back to
the left. DO NOT FORCE IT. Wait until it
moves easily. Turn the Oven Selector to OFF.
The Clean Indicator Light will go off.
After the oven is cool, wipe off any residue
or ash with a damp cloth. If needed, touch up
spots with a soapy steel-wool pad.
To stop the Self-Cleaning
cycle at any time:
1. Push in and turn the Stop Time Knob clock-
wise until it points to the correct time of day.
2. Turn the Oven Selector and Oven Tempera-
ture Control to OFF. When the Lock Indicator
Light goes off, move the Lock Lever back to
the left. DO NOT FORCE IT. Wait until it
moves easily.
Special tips
l
Keep the kitchen well ventilated during the Self-
Cleaning cycle to help get rid of heat, odors and
smoke.
l
After the oven is cool, wipe up any residue or
ash with a damp cloth.
l
Clean the oven before it gets heavily soiled.
Cleaning a very soiled oven takes longer and
results in more smoke than usual.
l
If the Self-Cleaning cycle does not get the oven
as clean as you expected, the cycle may not
have been set long enough or you may not
have prepared the oven properly. Set the Self-
Cleaning cycle longer the next time and hand-
clean areas noted on page 19.
21