Selecting Images - Panasonic SV-PT1 Operating Instructions Manual

TV Mode (Slide Show Settings)
The SLIDE SETUP setting allows you to specify which images to display in a Slide
Show. (p. 29)

Selecting Images

Specify the images in the index to be included in the Slide Show. If you wish to
include all images in the index, this procedure is not necessary.
1
Do Steps 1~3 on page 29. In Step 3,
press to select "SELECT".
2
Press SET.
• The cursor will move to the beginning of
the index.
3
Press to select an image,
then press SET.
• Pressing SET again to cancel selection.
• " " appears at the bottom, right corner of a
selected image.
• Repeat Step 3 until all images for the
Slide Show are selected. Images will be
displayed in the order selected.
• Images in a folder must first be displayed
in the index for selection. (p. 27)
4
Press MENU when selection is
complete.
5
Press to select "YES",
"CONTINUE" or "CANCEL", then
press SET.
YES : To exit setup.
CONTINUE : To continue selection.
CANCEL : To cancel image selection.
6
Press to return to "SLIDE SETUP".
30
MENU
/SET
SET