Attaching the Hand Strap
1
Insert strap end loop into gap of
Attachment Pin.
2
Thread opposite end through the
end loop and pull strap tight in
the direction of arrow.
Caution
• This unit is a precision device. When carrying this unit, ensure that it does not swing
excessively. Do not drop this unit or subject it to strong impacts.
Using the Carrying Case
1
Open the carrying case.
2
Insert this unit into the lower
compartment.
3
Insert the PC Card HDD case into
the upper compartment with the
"PC Card HDD" mark facing
upward.
4
Close the carrying case.
Caution
• When transporting the unit, always turn off the power and insert the PC Card HDD into its
case and then place the case inside the carrying case.
Carrying the Unit
15