Button Functions; Aux Out Functions; Aux In Function; Warm-Up Your Headphones - JLab Audio OMNI Manual

BUTTON FUNCTIONS

POWER ON:
Press and hold center button for 3 seconds.
Voice prompt "JLab Omni on" and white
light blinks slowly.
POWER OFF:
Press and hold center button for 3 seconds.
Voice prompt "power off" and lights turn off.
PLAY / PAUSE / ANSWER
Press center button once.
*SIRI FOR APPLE DEVICES:
Press and hold for 2 seconds.

AUX OUT FUNCTIONS

MIC
AUX OUT AUX IN

AUX IN FUNCTION

MIC
AUX OUT AUX IN

WARM-UP YOUR HEADPHONES

Optional: Burn-in is the process for exercising new audio equipment. We recommend 40 hours of burn-in time for most headphones to reach
optimal performance. The main purpose of the process is to loosen the diaphragm of a newly crafted headphone and to stress the headphone
driver. Normal, everyday use can also burn-in the headphones though JLab's proprietary burn-in provides an ideal mix of sounds and
frequency sweeps to achieve this.
Burn-in your audio equipment with the JLab Audio app available on the App Store and Google Play.
Or access the burn-in method at:
CAUTIONS
• Avoid getting moisture or liquids on the headphone cups.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing headphones, stressing the cable by
rapid pulling or extreme force, or bending the cable at a sharp
angle.
• Wax may build up in headphone cups, lowering the sound quality.
Carefully remove the wax with a cotton swab or other small tool to
improve the sound quality.
/ HANG UPv:
SHARE YOUR MUSIC
Connect another headphone or earbud into
the Omni AUX port to share the same content
from your Bluetooth device. The Omni will
power both devices and the button functions
will work alongside both headphones.
jlabaudio.com/burnin
TRACK FORWARD:
Quickly turn and release wheel clockwise.
TRACK BACKWARD:
Quickly turn and release wheel counterclockwise.
VOLUME UP:
Turn and hold wheel clockwise.
VOLUME DOWN:
Turn and hold wheel counterclockwise.
*Siri is a registered trademark of Apple Inc. and is no way affiliated with this promotion.
BLUETOOTH RECEIVER
Using the AUX cable, the Omni can plug into a
receiver or stereo input and turn the device into a
Bluetooth receiver. Make sure to adjust the volume
on the Omni and your input device accordingly.
Connect the AUX cable to the Omni AUX port and your device to use as a
non-Bluetooth headphone. Omni does not need to be turned on for AUX
INPUT function.
Note: The Omni button functions will not function while in AUX INPUT
mode. Functions will be controlled solely from your device.
• If you experience discomfort or pain, try lowering the volume
or discontinuing use temporarily.
• If you experience regular discomfort while using this product,
discontinue use and consult your physician.
• We recommend you treat your headphones as you would a nice
pair of sunglasses and keep them in safe location when not in use.