Advertisement
We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
30
DAY
FIRST TIME SETUP: BLUETOOTH PAIRING
Turn on the Bluetooth
1
in your device settings.
Settings
Bluetooth
Notes:
• For Bluetooth to work with your device, make sure the AUX switch is on AUX OUT. Omni will search and connect to the last Bluetooth
device it was connected to when turned on.
• Omni can be connected to 2 devices at one time but cannot play simultaneously. To reset the Bluetooth connection with a new device,
follow the Bluetooth pairing steps. To unpair, select forget JLab Omni on your device in your Bluetooth settings.
• If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.
ACCESSORIES
AUX
MICRO USB
CABLE
CABLE
TRAVEL
CASE
YOUR SATISFACTION IS GUARANTEED
You may exchange or return merchandise within 30 days of the purchase date.
jlabaudio.com/guarantee
Learn more at
YOUR WARRANTY
You may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio
authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
support@jlabaudio.com
Reach out to us at
When the Omni Headphones are
2
powered off, press and hold the center
button for approximately 10 seconds.
The power will first turn on with a
blinking white light and voice
"JLab Omni on" followed by blue and
white blinking lights and voice
"Waiting for device to connect".
CHARGING
Note: For optimum performance, charge overnight with Micro USB cable prior to using.
Connect the Micro USB cable to the headphone's left earcup input and connect the USB into a computer
or AC adaptor (not included). Make sure the USB connection has a power output source.
Solid red light indicates Omni is charging.
Solid white light indicates Omni is fully charged.
Full charge is between 1.5-2 hours.
OR
jlabaudio.com/contact
or visit
Select "JLab Omni" in your device settings
3
to connect.
Settings
Bluetooth
JLab Omni
Charging
MICRO USB
INPUT
When the headphones
are paired, voice prompts
"Omni paired to device" and
white light blinks slowly.
Fully charged
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for JLab Audio OMNI
Summary of Contents for JLab Audio OMNI
- Page 1 Notes: • For Bluetooth to work with your device, make sure the AUX switch is on AUX OUT. Omni will search and connect to the last Bluetooth device it was connected to when turned on. • Omni can be connected to 2 devices at one time but cannot play simultaneously. To reset the Bluetooth connection with a new device, follow the Bluetooth pairing steps.
- Page 2 Omni and your input device accordingly. will work alongside both headphones. AUX IN FUNCTION Connect the AUX cable to the Omni AUX port and your device to use as a non-Bluetooth headphone. Omni does not need to be turned on for AUX AUX OUT AUX IN INPUT function.
Need help?
Do you have a question about the OMNI and is the answer not in the manual?
Questions and answers