Button Functions - JLab Audio STUDIO ANC Manual

BUTTON FUNCTIONS

VOLUME UP:
Press once
TRACK FORWARD:
Press & hold 2+ seconds
VOLUME DOWN:
Press once
TRACK BACKWARD:
Press & hold 2+ seconds
POWER ON / OFF:
Press & hold 2+ seconds
PLAY / PAUSE / ANSWER
HANG UP CALLS:
Press once.
REJECT INCOMING CALL:
Press & hold 1 second
ACTIVATE SIRI (iOS) OR
"OK GOOGLE" (ANDROID):
Press twice
BLUETOOTH PAIRING:
See FIRST TIME SETUP
AUX INPUT
AUX INPUT
CABLE
NOTE:
• The ANC function can work when connected with AUX INPUT.
Press and hold 2+ seconds the ANC button to Power ON/OFF.
• The AUX IPUT will override your Bluetooth device connection.
Unplug to revert back to Bluetooth.
• The button functions for your Bluetooth device will not work
when AUX INPUT is connected.
• The volume will be dependent on your AUX device settings.
Adjust accordingly.
/
Plug into in-flight
media entertainment
or play without
battery power
ACTIVE NOISE CANCELING
CONNECTED TO BLUETOOTH:
Press once to Power ON/OFF.
ON: 2 Beeps OFF: 1 Beep
CONNECTED TO AUX:
Press and hold 2+ seconds to power ON/OFF.
ON: 2 Beeps OFF: 1 Beep
ANC ON
CHARGING
Note: For optimum performance, charge overnight with Micro
USB cable prior to using. Allow about 3 hours to fully charge.
Connect the Micro USB (included) to the headphone and connect
the USB into a computer or AC adaptor (not included).
Make sure the USB connection has a power output source.
Solid red light indicates the headphone is charging.
Solid blue light indicates charging is complete.
Note: Studio ANC can still be used while charging.
Power on and connect to device after charging occurs.
CHARGING
CABLE
OR
CHARGING
FULLY CHARGED