Table of Contents
Advertisement
Ceiling dimension and hanging bolt location
• The dimensions of the paper model for installation are the same as those of the ceiling
opening dimensions.
Ceiling
CAUTION :
• This air-conditioner uses a drain
pump.
• Install the unit horizontally using a
level gauge.
• During the installation, care should
be taken not to damage electric
wires.
• Select and mark the position for fixing bolts
and piping hole.
• Decide the position for fixing bolts slightly
tilted to the drain direction after considering
the direction of drain hose.
• Drill the hole for anchor bolt on the wall.
NOTICE
• Avoid the following installation location.
1. Such places as restaurants and kitchen where considerable amount of oil steam and flour is
generated.
These may cause heat exchange efficiency reduction, or water drops, drain pump mal-function.
In these cases, take the following actions;
• Make sure that ventilation fan is enough to cover all noxious gases from this place.
• Ensure enough distance from the cooking room to install the air conditioner in such a place
where it may not suck oily steam.
2. Avoid installng air conditioner in such
places where cooking oil or iron
powder is generated.
3. Avoid places where inflammable gas
is generated.
4. Avoid places where noxious gas is
generated.
5. Avoid places near high frequency
generators.
Level gauge
Air conditioner
1 010 (Ceiling opening)
877 (Hanging bolt)
830
Ceiling board
Take enough
distance
Cooking table
Installation Manual 7
Installation
60
unit: mm
Use the ventilation fan
for smoke-collecting
hood with sufficient
capacity.
Advertisement
Table of Contents
