Garrison 043-5488-8 User Manual page 9

AIR CONDITIONER FEATURES
TIMER: AUTO START/
STOP FEATURE:
CHECK FILTER FEATURE:
Auto
Mode Mode
Auto
-
- When the time of TIMER ON is displayed
- Press or hold the UP or DOWN button to change the
Press Timer
button
- The selected time will register in 5 seconds, and the
- Turning the unit ON or OFF at any time or adjusting
Press Check
Filter button
Display
#
(CONTINUED)
NOTE:
When the unit is on or off, first press the Timer button .
The TIMER ON indicator light illuminates. It indicates
the Auto Start program is initiated.
Timer button again. The TIMER OFF indicator light
illuminates. It indicates the Auto Stop program is
initiated.
Auto time by 0.5 hour increments, up to 10 hours
at 1 hour increments up to 24 hours. The control will
count down the time remaining until start.
system will automatically revert back to display the
previous temperature setting or room temperature when
the unit is on.(When the unit is off,there is no display.)
the timer setting to 0.0 will cancel the Auto Start/Stop
timed program.
NOTE:
This feature is a reminder to clean the Air Filter for
more efficient operation. The LED (light) will illumi-
nate after 250 hours of operation. To reset after
cleaning the filter, press the Check Filter button and
the light will go off.
DISPLAY :
shows the set temperature in " C" or " F" and the
It
Auto-timer settings . While on Fan only mode, it shows
the room temperature.
Error codes:
AS-Room temperature sensor error -
#
plug it back in. If error repeats, call for service.
NOTE: In Fan only mode,it will display "LO"or "HI".
-Evaporator temperature sensor error-Unplug the
unit and plug it back in. If error repeats, call for
service.
" "
NOTE: is displayed as shown in the left picture.
HS -Electric heating sensor error-Unplug the unit and
#
plug it back in. If error repeats, call for service.
8
press the
#
O O
Unplug the unit and
#
#
then