Connections; Basic Connections (For Supplied Accessories) - Panasonic SC-AK200 Operating Instructions Manual

1
F M A N
1
2
A M A N
3
1
Gray
6
RQT6085
1
3
2
Adhesive tape
T
)
(
FM indoor antenna
G N D
2
AM loop antenna
T
L O O P
E X T
Red (+)
Black (–)
2
Blue (–)
Gray (+)
Blue
Black
Red

Connections

Basic connections (for supplied
accessories)
•
Plug the AC power supply cord into a household AC outlet only
after all other connections have been made.
• To prepare the antenna wires and speaker cords, twist the vinyl
cover tip and pull off.
1
Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position where radio
4
signals are received with the least amount of interference.
Note
For best reception sound quality:
An FM outdoor antenna is recommended. (See page 7.)
2
Connect the AM loop antenna.
After attaching the antenna, turn on the system and tune in a
broadcast station. Put the antenna where the reception is best
and interference is minimal.
3
Connect the speaker cables.
Connect each end of the speaker cables to the terminal lever of
the same color so (+) and (–) are correct. Never allow the
exposed wires to contact each other when connected.
Incorrect connection can damage the unit.
Caution
• Use only the supplied speakers.
The combination of the main unit and speakers provide the
best sound. Using other speakers can damage the unit and
sound quality will be negatively affected.
4
Connect the AC power supply cord.
Note
The included AC power supply cord is for use with this unit
only. Do not use it with other equipment.
Caution
•
Use the speakers only with the recom-
mended system.
Failure to do so may lead to damage to the
amplifier and/or the speakers, and may result
in the risk of fire.
Consult a qualified service person if damage
has occurred or if you experience a sudden
change in performance.
•
Do not attach these speakers to walls or
ceilings.