Optional Antenna Connections; External Unit Connection - Panasonic SC-AK200 Operating Instructions Manual

A
T
F M A N
)
(
G N D
1
2
B
AM outdoor antenna (not included)
5 -12 m
16 – 40 ft.)
(
T
A M A N
L O O P
E X T
C
R L
(R)
(L)
FM outdoor antenna
(not included)
75 coaxial cable (not included)
1
30 mm
(1 3 / ˝)
16
2
Shield braid
15 mm
( 19 ˝)
/
32
Core wire
3
AM loop
antenna
(included)
Rear panel of this unit
Analog player (not included)
Connections

Optional antenna connections

You may need an outdoor antenna if you use this system in a
mountainous region or inside a reinforced concrete building, etc.
A
FM outdoor antenna
Disconnect the FM indoor antenna if an FM outdoor antenna is in-
stalled.
1 Remove a piece of the outer vinyl insulator.
2 Twist the shield braid.
3 Expose the core wire.
Note
An outdoor antenna should be installed by a qualified technician only.
B
AM outdoor antenna
Connect the outdoor antenna without removing the AM loop antenna.
Run 5 to 12 m of vinyl-covered wire horizontally along a window or
other convenient location.
Note
When the unit is not in use, disconnect the outdoor antenna to prevent
possible damage that may be caused by lightning. Never use an
outdoor antenna during an electrical storm.

External unit connection

C
•
An analog player with a built-in phono equalizer can be connected.
•
For details, refer to the instruction manual of the units which are to
be connected.
•
When units other than those described above are to be connected,
please consult with your audio dealer.
7
RQT6085