Panasonic SA-XR25 Operating Instructions Manual page 18

Control guide
Remote control
Buttons not explained on this page are used only to operate other equipment. Refer to the separate Remote
Control Operation Guide for details.
[^, RECEIVER]
Standby/on button.
[1, 2, 3, 4, 5, 6, 7, 8, 9, 0]
To enter radio frequencies and
channels.
[ > = 10, ENTER]
To enter two digit channels.
[DISC, DIRECT TUNING]
To enable selection of radio stations
by frequency.
[e,r,w, q, ENTER, RETURN]
To operate the on screen menus.
( SA-XR45 )
[DIMMER]
For dimming the unit's display and
turning off the panel light.
[INPUT MODE]
For selecting AUTO, ANALOG or
DIGITAL.
[SLEEP]
To start the sleep timer.
[STEREO/2CH MIX]
For selecting STEREO or 2CH MIX
mode.
[DOLBY PRO LOGIC 2 2 ]
For selecting a Dolby Pro Logic 2
mode: MOVIE,
PANORAMA.
[NEO:6]
For selecting a NEO:6 mode:
CINEMA or MUSIC.
[SFC]
For selecting SFC modes.
18
DIRECT TUNING
DIRECT
NAVIGATOR
MUSIC or
For your reference
¡When DVD 6CH input is on
¡When using the subwoofer
¡When muting is on
RECEIVER
RECEIVER AV SYSTEM
DVD TV
^ ^
2CH / 6CH
TUNER/BAND TAPE CD
VCR
RECEIVER
1
2 3
CH
4 6
5
VOLUME
7 8 9
ENTER
>
0 10
=
DISC
SLOW / SEARCH
SKIP
u i t y
– TV VOL +
h
TOP MENU MENU
PLAY
LIST
ENTER
DISPLAY RETURN
TV/VIDEO DIMMER SUBWOOFER MUTING
INPUT MODE –/L +/R
-TEST/–SETUP
TONE/
SLEEP LEVEL EFFECT
BALANCE
STEREO/ DOLBY
NEO:6 SFC
2CH MIX PRO LOGIC
Speaker settings are ineffective. Change the settings on the DVD player if necessary.
You cannot adjust subwoofer level if DVD 6CH INPUT is selected.
Sound can be distorted if you raise the volume while subwoofer level is high. Reduce
subwoofer level if this occurs.
Muting is also canceled when the unit is turned off.
[DVD 2CH/6CH, TV,
TUNER/BAND RECEIVER,
TAPE, CD, VCR] (
SA-XR45
[DVD 2CH/6CH, TV,
TUNER/BAND, TAPE, CD, VCR]
( )
SA-XR25
Input mode and remote control mode
buttons.
DVD 2CH/6CH:For switching between
6-channel and
2-channel DVD input.
These buttons light when you press
other buttons to indicate the current
remote control mode. ( SA-XR45
[1, CH, 2]
For selecting preset radio channels.
[+, –, VOLUME]
To adjust the volume.
[SUBWOOFER]
For selecting subwoofer level.
Adjust the level in 5 steps:
SW MIN, SW 5, SW 10, SW 15, and
SW MAX.
Select SW to stop output.
– – –
[MUTING]
To mute the volume.
[-TEST/–SETUP] (
SA-XR45
To start the speaker test signal or
enter the setup menu.
[TEST] ( SA-XR25 )
To start the speaker test signal.
[TONE/BALANCE]
To adjust the bass, treble and front
speaker balance.
[LEVEL]
Use when adjusting speaker level.
[EFFECT]
Use when adjusting Dolby Pro Logic
2, NEO:6 or SFC effects.
[–/L, +/R]
First select SLEEP, EFFECT, LEVEL,
TONE or BALANCE, then press [–/L]
or [+/R] to adjust.
)
)
)