Step; Settings - Panasonic SA-XR25 Operating Instructions Manual

Step

POWER 8
POWER 8 ^
% DIGITAL EX % DIGITAL % PL2 DTS 96/24 DTS-ES DTS NEO:6
Display
RECEIVER
RECEIVER AV SYSTEM
DVD TV
^ ^
2CH / 6CH
TUNER/BAND TAPE CD
VCR
RECEIVER
1 2 3
CH
4 6
5
VOLUME
7 8 9
DIRECT TUNING ENTER
>
10
0
DISC =
SLOW / SEARCH
SKIP
u i t y
– TV VOL +
h
TOP MENU MENU
DIRECT PLAY
NAVIGATOR
LIST
ENTER
DISPLAY RETURN
TV/VIDEO DIMMER SUBWOOFER MUTING
INPUT MODE -TEST/–SETUP –/L +/R
TONE/
SLEEP LEVEL EFFECT
BALANCE
STEREO/ DOLBY
NEO:6 SFC
2CH MIX PRO LOGIC
10
3
1 2 4
TUNE 2 TUNE 1
PRESET TUNE 2 TUNE 1
FM MODE MEMORY
INPUT SELECTOR MULTI-SOURCE ENHANCED
DIGITAL RE-MASTER SURROUND BAND
DOWN
INPUT SELECTOR BAND
POWER 8
Switch on
INPUT SELECTOR
VOLUME
BAND
Press at the
same time
INPUT SELECTOR
BAND
–/L +/R
LEVEL
SA-XR45
-TEST/–SETUP
TUNE 2 TUNE 1
SA-XR25
TEST
INPUT SELECTOR
BAND
Press at the
same time

Settings

SA-XR45 also has an On Screen Display Mode for settings 1
to 4 (
pages 12 and 13).
\
1
SPEAKERS
Set the size to suit your
speakers
LARGE: For speakers that
reproduce a full sound range,
particularly the bass range
below 100 Hz.
SMALL: For speakers that cannot
adequately reproduce the
bass range. This setting is
sufficient for most speakers if
you are using a subwoofer.
NONE: For speakers you haven't
connected (center or surround).
The factory settings are:
For the surround back (SUR BACK) and
subwoofer (SUB-WFR), select YES if
you have connected one (factory
setting), or NO if you have not.
Enter the setting mode.
Select "SPEAKERS".
SPEAKERS
Select the speaker.
FRONT
FRONT, CENTER, SURROUND,
SUR BACK, SUB-WFR
Repeat.
Change the setting.
SMALL
NONE, SMALL, LARGE
NO, YES
Exit the setting mode.
2
DISTANCE
Enter the distance of the front,
can
center and surround speakers
from the seating position
Change the distance so that the sound
from all the speakers (except for the
subwoofer) reaches you at the same
time.
You can select distances between 3
and 30 feet at one-foot intervals.
The factory settings are:
SMALL
FRONT and CENTER:
SURROUND and SUR BACK:
Select "DISTANCE".
DISTANCE
Select the speaker.
FRONT
FRONT, CENTER,
SURROUND, SUR BACK
Repeat.
Change the setting.
10 FEET
3 FEET
10 FEET
5 FEET
30 FEET