Step-By-Step Procedures - Yamaha AW2816 Manual

Professional audio workstation, recording101

Hide thumbs Also See for AW2816:

Table of Contents

STEP-BY-STEP PROCEDURES

Recalling the Initial Data Scene on an AW2816

All of the internal settings on an AW2816 can be stored in the internal memory as a ''scene''. Scene 00 in

the AW2816 is the ''Initial Data'' setting. Recalling Scene 00 on the AW4416 sets the Mixer back to its

default settings. Unless the settings from the previous Song are needed, Scene 00 should always be

recalled before starting a new Song.

NOTE: The demo Song of the AW2816 has an Expander on the Stereo Bus. If the current Song is the

demo Song, and if Scene 00 is not recalled before starting a new Song, the Expander settings carried

over from the demo Song can create an unwanted effect on the audio when the Stereo Bus level falls

below -35 dB.

1) Press the [SCENE] button. The 'SCENE MEMORY LIBRARY' will appear.

2) Press the [F1] button.

3) Turn the (DATA/JOG) dial to select '00.Initial Data' from the 'No. LIBRARY TITLE' list box.

4) Press the

5) Press the [ENTER] button. The 'CONFIRMATION' prompt window will appear with the message,

'ARE YOU SURE?'.

6) Press the 'CURSOR' button to select 'OK'.

7) Press the [ENTER] button to execute the scene recall operation.

o 'CURSOR' buttons to move the cursor to 'RECALL'.

Table of Contents