Play With Blue Tooth Device; Replace The Remote Control Battery - i-onik MSC-330 BT Manual

12 Power indicate light
Power indicate light is green when the power is provided.
13 LINE IN socket
14 LINE IN cable
- LINE IN socket on the amplifier.
- HEADPHONE socket on an external audio device.

Play with Blue Tooth Device

You can listen to music from a bluetooth-enable device
via this player.
Pair the Bluetooth-enabled devices
The first time you connect your bluetooth device to this
player, you need to pair your device to this player.
Note:
- The operational range between this player and
a Bluetooth device is approximately 8 meters.
- Before you connect a Bluetooth device to this
unit, familiarize yourself with the Bluetooth
capabilities of the device.
- Compatibility with all Bluetooth devices is not
guaranteed.
- Any obstacle between this unit and a Bluetooth
device can reduce the operational range.
- Keep this player away from any other electronic
device that may cause interference.
1. Turn on the Bluetooth function on your device.
2. Switch player's source to bluetooth (the indicate light
is orange)
3. Hold and press "
BF
for seconds to activate bluetooth pairing mode, and
the indicate light flashes (lights up every 2 seconds)
2. Search for bluetooth device with your device.
3. Select "BLUEPORT" in the pairing list.
4. Enter default password "0000" , if the pairing succeeds,
then the indicate light turns orange and flashes
(lights off ever 2 seconds).
5. To disconnect connection, turn off the bluetooth
function on your device or switch the player to other
source.
Tip
- If there's a connection exist, hold and press "
PAIR" button on remote control for seconds will re-
activate the pairing mode, the connection will be
interrupted.
- If there's no other bluetooth device pair with this
player in two minutes, the player will recovery previous
connection.
/PAIR" button on remote control
- The player will also be disconnected when your
device is moved beyond the operational range.
- If you want to reconnect your device to this player ,
place it within the operational range.
- If the device is moved beyond the operational range,
when it is brought back, please check if the device is
still connected with the player.
- If they are connected, indicate light flashes (lights off
every 2 seconds)
- If the connection is lost, indicate light keeps orange,
follow the instruction above to pair your device to the
player again.
Listen to music from bluetooth device
If the connected Bluetooth device supports Advanced

Audio Distribution Profile (A2DP), you can listen to the
music stored on the device through the player.
If the device also supports Audio Video Remote

Control Profile (A VRCP) profile, you can use the player's
remote control to play music stored on the device.
1. Pair your device with the player.
2. Start play music via your device (if it support A2DP)
3. Use supplied remote control to control play
(if it support A VRCP)
- To pause/resume play, press the
- To skip to a track, press the

Replace the Remote Control Battery

1 Use needle to push the battery forward through the
hole on rear of remote control.
2 Remove the old battery. Place a new CR2025 battery
with correct polarity (+/-) as indicated.
Then install the battery into remote control.
/
BF
10
button.
BF
buttons.
H/G