Identifying The Pats; Remote Control; Unit - i-onik MSC-330 BT Manual

Identifying the Pats

Remote Control

1
Turn on or turn off the speakers.
2
Select a source.
3
H
Skip to previous track.
4 /PAIR
BF
Start or pause playback.
Pair the bluetooth-enabled device.
5 Bass
Boost low and bass.
6
G
Skip to next track.
7
+/-
Increase or decrease the volume level.
8
Mute or resume the sound.

Unit



1
Note:
-
-
2
3
4
5
6
7
8
9
10 Left speaker
11 Speakers out sockets-Left
9
AC power cord: Connect the AC power cord to the wall
socket. The power indicate light (12) showes green.
Risk of product damage!
Ensure that the power supply voltage corresponds to
the voltage printed on the back or the underside of
the unit.
Amplifier Box
Speakers out sockets-Right
Right speaker: be connected to right speaker out socket.
Remote control sensor
Indicate light:
1) Showes Red in STANDBY mode.
2) Show GREEN is in LINE IN source,
Show ORANGE in is Bluetooth source.
3) Flashes quickly while to increase or decrease the
volume level. Flashes slowly when the volume is
max or lowest.
4) Flashes every second in MUTE mode; Switch to
GREEN(ORANGE) when sound is resumed.
5) Flashes when turn on or turn off the bass.
VOL +/-
Increase or decrease the volume level.
ON/OFF
Turn on or turn off the unit.
DOCKING STATION
Place iPad, iPhone or iPod on it.
Be connected to left speaker out socket.