Cleaning Recommendations; Storage; Troubleshooting - Revitive UT1033 User Manual

Instructions for use

CLEANING RECOMMENDATIONS

Do not immerse the device in water.
Do not clean with chemicals.
No part of REVITIVE Ultrasound is suitable for dishwasher use.
Important: It is recommended to clean the product after every use.
Clean the Treatment Head with a tissue or a soft, damp cloth. This will remove
any excess Ultrasound Gel.

STORAGE

REVITIVE Ultrasound:
When not in use, store the device with the adaptor in a dry room and protect
it against extreme moisture, heat and direct sunlight.
Air pressure, humidity and temperature limits for storage:
1060 hPa 1060 hPa
93 %
700 hPa
700 hPa
20 %
-10 °C
REVITIVE Ultrasound Gel:
Wipe nozzle clean and re-cap after each use. Store in a cool, dry place.
16
3269_IFU02_14269060.indd 16-17
50 °C

Troubleshooting

Problem Possible Cause
Ultrasound waves, with a vibra-
No vibration
tion of 1-million times per sec-
ond are too fast to see or feel.
Therefore, you will not feel any
sensation when using REVITIVE
Ultrasound.
The temperature safety switch
has tripped and the unit has
switched off.
No vibration or The product has failed.
indicators
Unit will not turn on Temperature is too high.
Time indicator Poor contact between the
flashing treatment head and the body,
(not enough pressure is being
applied).
Solution
To confirm your REVITIVE
Ultrasound is operating,
follow the treatment head
test (See page 14 for
details).
Allow the unit to cool down.
Contact your dealer.
Allow to cool.
Apply a generous amount
of Ultrasound Gel to create
good contact between
the Treatment Head and
the body. Treatment is
automatically restored when
good contact is restored.
17
24/07/2017 11:59