Revitive UT1033 User Manual page 6

Instructions for use
Press the Time Button
15
durations (5,10 and 15 minutes), as shown by the Time
10
5 Indicators. When in use, the chosen Time Indicator will
be on constantly and the treatment will count down
for the chosen Time duration. If the Time Indicator is
flashing, there is not enough pressure being applied.
(See Troubleshooting, page
0 Min 5 Min
15 15
10 10
5 5
Hold the device horizontally with the Treatment Head
facing upwards. Apply the Ultrasound Gel to the
Treatment Head and spread in a circular motion for a
few seconds
Move the Treatment Head in a flat, slow, circular motion
over the skin surface of the treatment area. You should
aim to apply the Treatment Head evenly (in time) over the
surface area.
10
3269_IFU02_14269060.indd 10-11
to cycle through the Time
17).
10 Min 15 Min
15 15
10 10
5 5
(see page 15 for details).
After the Time duration has been completed, the
device will automatically turn off (all Time Indicators
will turn off and the therapy will stop). Once your
therapy session has been completed, turn off the
product by sliding the Power Button downwards. The
Power Indicator will turn off. The product is off when
none of the indicators are lit.
Important: Clean after every use.
(See Cleaning Recommendations page 16).
11
24/07/2017 11:59