Switching Modes - Daikin TYPE4 Checker Instruction Manual

5-1-3 Switching modes

Buttons in the bottom row of the screen can be used by switching modes by buttons on the upper row
at first then is pressed to execute desired function.
A. Map mode
Map mode
Detail Data Input
[Detail Data Input]
Press to enter detailed information such as model name or installation place. Please proceed
to "5-1-4 Detailed info input"
[Centralized operation]
If the centralized group numbers have been set, centralized control of indoor units can be
executed. Please proceed to "5-3 Centralized operation"
[Update map]
Please press in case of addition/removal of the units or replacement of control PCB. Network
map information will be acquired again to update.
(Note)
Units on the same D3-NET line will be in stand-by status (thermostat-off) for several minutes.
Please be aware of that. After completion of this sequence, system will resume automatically.
B. Display mode
Disp. op data
[Disp. op data]
Proceeding to [Operation data display] screen to check operation data of selected system.
Please proceed to "5-1-5 Operation data display"
[Number of units display]
Showing the number of connected outdoor and indoor units.
Centralized operation
Display mode
Disp. Q'ty
(Note)
Please proceed to Operation data screen after all icons turn to the
color other than white.
AS0112-P-DENV
Update map
24