Advertisement
6. MAInTenAnCe
6.1.
bATTery rePlACeMenT
WArnIng! disconnect the device from the voltage source and switch off when
‰
replacing the batteries.
6.1.1.
If LCD flashes 5 times it will switch off automatically during self diagnostics or voltage
measurement, this indicates the equipment has run out of battery. Please change the batteries.
6.1.2.
Battery power level will also display on the LCD during the voltage measurement; please
note the battery power level when using.
(1) Unlock the battery cap by using a coin.
(2) Open the battery cap and replace the battery. Be aware of the battery polarity (fig.8).
(3) Put back the battery cap and lock it with a coin.
WArnIng! Please make sure the battery cap is locked before any operation.
‰
6.2.
CleAnIng & sTorAge
Use a light damp cloth with neutral detergent for cleaning the instrument. do noT use
9
abrasives or solvent.
do noT expose the instrument to direct sun, high temperature, humidity or damp.
8
Remove batteries when the instrument is not going to be used for a long period.
9
do noT lock the battery cap without batteries.
8
enVIronMenT ProTeCTIon
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Weee regulATIons
dispose of this product at the end of its working life in compliance with the eU directive on Waste electrical and electronic equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
bATTery reMoVAl see seCTIon 6.1
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations).
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey group, Kempson Way, suffolk business Park, bury st edmunds, suffolk. IP32 7Ar
01284 757500
© Jack Sealey limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
PPHY Issue 1 18/07/19
fig.8
Advertisement
