Commissioning The Device - ProMed UBS-2.4 Instruction Leaflet

CommISSIonInG tHE DEVICE

Please ensure that none of the contents are missing from the box before using the device for the first time.
Only use original parts!
Do not use any other control!
Please ensure that the heating underblanket is not wedged in during use, rather that it is lying
completely flat and free of wrinkles.
Positioning the heating underblanket
1. Lay the underblanket out on the bed and smooth it out over the mattress. There are four elastic bands sewn
onto the underblanket at the corners. Use these to secure the underblanket at the corners of the mattress.
2. Ensure that the heating underblanket is lying taut on the mattress and does not become folded at any time
while being used. Spread a sheet over the underblanket. The warmth of the heating underblanket is best
distributed this way. Always check to make sure that the underblanket is situated correctly before going to
bed. We recommend turning the heating underblanket on 30 minutes before going to bed.
DE
3. Ensure that the heating underblanket is free of wrinkles and that the electric cable is not kinked or twisted and
that the control is not under the mattress. All of these could result in a malfunction of the heating underblanket
as high temperatures are generated, which in turn can trigger the mechanism to protect against overheating.
4. You can secure a fitted sheet over the mattress as usual
EN
Using the heating underblanket
1. Check whether both connectors (control connector (G)) and device connector (H)) are connected to each
other. If they are not, connect them and ensure that they are connected with each other correctly. To operate
FR
the device, plug the power plug (A) into the power socket. The notification „
and disappear again after approx. 1 second. To indicate that the device is still connected to the power
supply, the red bulb in the lower right corner of the display will remain lighted.
IT
2. Press the on / off button (F) to turn the device on.
3. To set the temperature desired, press the temperature button (D). You can set the desired temperature in
10 levels (1, 2, 3, 4, 5, 6, 7, 8, 9, H). To increase the temperature, press the "+" in the upper half of the
temperature button (D). To decrease the temperature, press the "-" in the lower half of the temperature button
ES
(D).
4. To set the operating time desired, press the timer button (E). You can set the desired operating time in 9 levels
(1, 2, 3, 4, 5, 6, 7, 8, 9). Here, each level corresponds to an operating time of one hour.
NL
To increase the operating time, press the "+" in the upper half of the timer button (E). To decrease the
operating time, press the "-" in the lower half of the timer button (E). After the operating time has been set,
the display returns to the temperature level selected.
5. The device is programmed so that an operating period of 4 hours and a temperature setting of 4 is pre-set
PL
as standard for when the device is turned on.
6. The device turns off automatically at the end of the selected operating period.
7. In order to turn the device on again after the selected operating period is up, simply press the one / off
SE
button (F).
8. To use the device for extended periods of time, the temperature settings of 1 - 4 are recommended.
note:
FI
If the device and the control are not connected with each other or not connected with each other correctly,
the letter "E" appears on the display. This notification also appears when the control or the device's
heating wires are malfunctioning.
AR
" will appear on the display