Samsung OH Series Quick Setup Manual

QUICK SETUP GUIDE
OH46F I OH55F
The colour and the appearance may differ depending on the product, and the
specifications are subject to change without prior notice to improve the performance.
Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the
United States and other countries.
Checking the Components
Contact the vendor where you purchased the product if any
components are missing.
The pictures may look different from the actual components.
Warranty card
QUICK SETUP GUIDE Power cord
(Not available in some locations)
Batteries
Remote Control
(Not available in some
locations)
BN68-08194Y-02
Parts
POWER
Remote sensor
1
Press a button on the remote control pointing at the sensor on
the front of the product to perform the corresponding function.
- Using other display devices in the same space as the remote
control of this product can cause the other display devices to be
inadvertently controlled.
Reverse Side
Connects to MDC using an RS232C adapter.
1
Outputs sound to an audio device via an audio cable.
2
Connect to a USB memory device.
3
- Wired LAN connection port used to connect an external device
4
such as a laptop to connect to the Internet.
- Connects to MDC using a LAN cable.
Troubleshooting Guide
Issues Solutions
The screen keeps Check the cable connection between
switching on and off.
the product and PC, and ensure the
connection is secure.
No Signal is displayed Check that the product is connected
on the screen. correctly with a cable.
Check that the device connected to the
product is powered on.
Not Optimum Mode is This message is displayed when a
displayed. signal from the graphics card exceeds
the product's maximum resolution and
frequency.
Refer to the Standard Signal Mode Table
and set the maximum resolution and
frequency according to the product
specifications.
The images on the Check the cable connection to the
screen look distorted. product.
The screen appears Check that the resolution and frequency
unstable and shaky. of the PC and graphics card are set within
a range compatible with the product.
There are shadows or
Then, change the screen settings if
ghost images left on
required by referring to the Additional
the screen.
Information on the product menu and the
Standard Signal Mode Table.
There is no image on
The product is in power-saving mode.
the screen and the
power LED blinks Press any key on the keyboard or move the
every 0.5 to 1 second. mouse to return to the previous screen.
- Sends the HDMI signal to a connected LAN cable using an
5
HDBaseT transmitter.
- Connects to MDC using a LAN cable.
Connects to a source device using a HDMI cable or HDMI-DVI cable.
6
Issues Solutions
Picture quality of the
product is different
Use an HDMI cable to obtain high-
from the dealer
definition (HD) picture quality.
shop where it was
purchased.
The remote control Make sure that the batteries are correctly
does not work. in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon
signs switched on in the vicinity.
A beeping sound is
If a beeping sound is heard when your PC
heard when my PC is
is booting, have your PC serviced.
booting.
The product smells The plastic smell is normal and
like plastic. disappears over time.
Small particles are
The particles are part of the product
found on the edges of
design. The product is not defective.
the product.
When I try to change The message The defined resolution
the PC resolution, a is not supported. appears if the input
message The source resolution exceeds the maximum
defined resolution resolution of the display.
is not supported. To resolve the issue, change the PC
appears. resolution to a resolution supported on
the display.